SpeedFan 4.33

Almico - (Freeware)

Fan speeds, temperatures and supply voltages of teh computer can now be monitored and even managed with this useful tool named SpeedFan.

SpeedFan is a software solution for monitoring fan speeds, temperatures and supply voltages of the computer, if the monitoring functions are present.

The application is able to access S.M.A.R.T.info hard drives to display their temperatures. The software also indicate the temperature of the processor and memory of the graphics card (nVidia only).

It offers the possibility of changing the FSB on some motherboards. SpeedFan is a hardware monitoring software, but its main function is to control the fan speed according to the temperature measured by the probes of the PC, thus reducing noise and power of the overall system power consumption.

Directly from its intuitive interface, the software can also increase the frequency of the processor better.

Title:: SpeedFan 4.33
File Size:: 1.6 MB
Requirements:: Windows (All Versions)
Language:: en-us
License:: Freeware
Date Added:: 17 Sep 2007
Publisher:: Almico
Homepage:: http://www.almico.com
MD5 Checksum:: 62DAFE34746303B563BBF2A325781966

4.33 - completely rewritten the detection and the identification strategy of ITE IT871xF
chips (fan readings are now ok)
- xAP support is now properly reenabled between sessions
- fixed context sensitive help (F1 key) on Windows Vista
- enabled, if needed, the SMBus on Intel ICH7 and ICH8-M
- added several checks to CPU usage routines, fixing a nasty issue where an error
window appeared once every second
- added full support for ATI SB600 SMBus
- added full support for Intel ICH9 SMBus
- added full support for nVidia MCP55 SMBus
- added sull support for ADT7475
- added nVidia Control Panel access to read video card temperatures
- supported the IT8716F and the IT8718F hardware monitor at unusual addresses
- added some SMB scan exceptions for Compal 08A0
- SMBus address $15 no longer scanned on AOpen i975Xa-YDG
- fixed an issue that caused the DFI LP UT NF4 SLI-DR Venus to power off on program
start
- added support for Fintek F71872F voltage readings
- IT8712F-J now uses two undocumented FAN DIVs
- speeded up Asus M2N32-SLI DELUXE program startup
- added detection of an unknown Fintek chip (to avoid false detection of other
sensors at the same address)
- W83627EHF and W83627DHG now properly show SMARTFAN III in CONFIGURE / ADVANCED
- W83627EHF and W83627DHG can now change PWM TYPE from PWM to DC in CONFIGURE /
ADVANCED
- fixed FAN DIVISOR settings for Winbond W83791D
- added PWM OUT BASE CLOCK selection for WINBOND W83627DHG, W83627EHF and W83627EHG
- warning temperature can now be set as high as 125C in CONFIGURE